How To Check Your House For Radiator Leaks
Every once in a while it is important to check our home radiators for leaks. There are several reasons why your one of your radiators could be leaking.
- One cause might be due to corrosion. An underlying fault usually causes corrosion with the system. If the valves or any parts of the radiator are corroded, then you might need to replace the radiator.
- Another reason could be the age. With time, parts wear out, and this could lead to holes where water seeps through, and this might mean the parts need to be replaced or if the damage is extensive, you might need a whole new radiator.
To find out the source of the leak, first, ensure that the area around your radiator is dry. Dry the radiator valves and any visible pipes, with paper towels. This is a quick way of establishing which pipe is leaking and at what point.
Turn on the radiator
To check for any leaks, ensure that the radiator is on. Water is only pumped into the radiator once it has warmed up and when it does, you’ll notice drops of water seeping from the radiator.
Check different sections of the radiator
A radiator can leak from different spots. Check the valve connection, the joints in the pipework and look for any parts that look old or worn. There are chances that the radiator parts may have corroded over time, and this is the cause for the leaks.
As a temporary solution, turn off the valves to the radiator by turning them in a clockwise direction if you can. This can slow down the leaking water until a qualified professional comes to attend to you and fix the issue.
Do You Have Leaking Radiator Valve?
If you have a leaking radiator valve, you can easily fix it yourself. This happens when the spindle packing in the valve is damaged or worn out. These leaks can happen when the valve is in the middle, and the leak stops when the valve is fully open or closed.
To repair it, drain the central heating system and have a replacement valve of the same type ready. Loosen the nuts connecting the valve and water pipe and unscrew the valve to replace it. Bleed the radiator and be sure to wrap the new valve in PTFE tape. Carefully screw it back in place.
Call a Professional
For all other issues, always call in the professionals to have your radiator checked out. They will advise you on the steps to take and the earlier you have it fixed, the more you prevent further damage. A leaking radiator will cause boiler pressure loss.
Here at ADI Leak Detection we utilise many methods of leak detection including hydrogen gas, and this is 100% safe. We start by sealing off central heating plumbing then pumping in hydrogen gas. Once the pipes are full of hydrogen, we now start looking for traces of hydrogen to identify the source of leaks.
This makes it easy to detect even the smallest of leaks.
You can reach us for friendly and professional services for your leak detection and repair across the UK. Reach us today on 0800 731 3843 and we will be pleased to help.